Here’s a clear, helpful guide to care instructions and usage tips for your bed, dresser, mirror, nightstand, and modern bedroom furniture like the ones from ARV Furniture in Mississauga, Ontario, Canada — based on best practices and general manufacturer recommendations.

🛠️ 1. Assembly & Ongoing Maintenance

Before using any furniture:
Follow the included assembly instructions step-by-step. Tighten screws and bolts as directed.
Save leftover parts and tools for future tightening/checking.
After the first 2 weeks, re-check hardware tightness, and then check every 3–6 months.
Always lift furniture when moving, don’t drag — this protects legs, joints, and your floors.

🧼 2. Cleaning & Finishing Care
🌲 Wood, MDF or Veneer Surfaces (Beds, Dressers, Nightstands)
Dust regularly with a soft microfiber cloth to stop buildup.
For sticky spots, use mild soap + water, then dry immediately.
Avoid harsh chemical cleaners, silicone polishes, and abrasive pads — they can damage finishes.
Use coasters or mats under lamps, perfume bottles, or electronics to prevent water rings or scratches.
Keep furniture away from direct sunlight, extreme heat, or moisture (like humidifiers or vents).

🪞 Mirror Care
Clean mirrors with glass cleaner or a vinegar + water mix sprayed on a cloth — never spray directly onto the mirror.
Wipe in a smooth motion to avoid streaks.
Gently dust mirror frames — especially wood or metal frames — with a dry cloth.
Avoid moisture exposure at the mirror edges to prevent damage.

🛏️ Upholstered Headboards / Beds
Vacuum gently with a soft brush attachment to remove dust.
For stains, blot (don’t scrub) with mild soap and water.
Keep upholstered parts out of direct sunlight to prevent fading.

🧰 3. Proper Use & Function
🛏️ Bed / Headboard
Rotate or flip mattresses (if applicable) every 3–6 months to reduce uneven wear.
If your bed has storage or hydraulic lifts, open and close gently and avoid overloading storage compartments.
For drawers and storage beds, use drawer liners and avoid overfilling — this helps keep slides operating smoothly.

🗄️ Dresser & Nightstand
Avoid placing very hot or damp items directly on top surfaces. Always use coasters or protective mats.
Store heavier items in bottom drawers to keep furniture balanced.
Vacuum drawer interiors occasionally to keep them clean.

📐 4. Placement & Style Tips

Place nightstands within easy reach on both sides of the bed for symmetry and function.
Leave clear walkways around furniture (about 2.5–3 ft) so drawers, doors, and paths don’t get blocked.
For modern looks, keep surfaces relatively clutter-free — minimal items like a lamp, plant, or tray help style without crowding.
Use drawer organization trays so you make the best use of storage space.

🌡️ 5. Environment Tips for Longevity
Maintain indoor humidity around 35–55% to help protect wood furniture from cracking or swelling.
Keep pieces away from direct heat sources or too-cold walls to prevent warping or finish cracking.